|Home » |
New Pyrolox 1.5 Fleck 2510 Iron, Sulfur, Manganese removal water filter
Pyrolox Fleck 2510 Filter 1.5 c. ft.
For Iron, Sulfur, & Manganese Removal
Features & Specs
10" x 54" Structural USA tank
1.5 cu. ft High density iron and sulfur removing Pyrolox media
Gravel bed for equal water dispersion
#1 rated Fleck 2510 control valve for automatic backwashing
Bypass valve included, 1" size.
Calibrated flow control for proper backwashing
Removes iron up to 10 ppm
Removes sulfur (rotten egg odor) up to 4 ppm
Removes manganese up to 4 ppm
No chemicals to use, once set up, all automatic!
Acts as a general turbidity filter to remove dirt, sand, cloudy water
Say goodbye to smelly, bad tasting, stain causing water! This Pyrolox iron, sulfur and manganese filter will help you put these problems behind you.
Iron is a big source of problems in water supplies, causing red discolored water, red or reddish-brown staining and sometimes giving the water a metallic taste.
Sulfur is frequently associated with iron, and can easily be recognized by the rotten egg odor.
Manganese often found in water contaminated with iron or sulfur,identifiable by black, slimy staining and metallic taste.
You can get rid of all three problems with one single unit. Pyrolox media is a naturally mined ore that oxidizes the iron, sulfur, and manganese, allowing it to be trapped by the dense media bed. The density of the Pyrolox media also allows it to work well as a general sediment and turbidity filter. Iron & sulfur is trapped in the filter media then the unit automatically backwashes it down the drain to keep it clean!
With no chemicals to add and an automatic backwashing control head, this system cuts maintenance down to a minimum!
As with any iron filter, pH is a key factor, a minimum pH of 6.3 is required for best results or you may need a pH neutralizing Calcite filter. You will also need a flow rate of at least 10-12 gpm for backwashing. We have supplemental instructions for the homeowner to install easily. Simple in and out 1" connections
No more iron staining! No more odors! Removes iron & sulfur from your water!
High Flow Whole house application, treat and clean all your water with one tank!
No chemicals, no salt, no additives, all automatic! 5 year warranty!
Remove rotten egg odor, remove ferrous & ferric iron, and manganese
Removes up to 10 ppm of iron, cleans your water, easy to install!
Average Customer Review:
( 0 customer reviews )
Write an online review and share your thoughts with other customers.